Custom Bathroom Vanities in Paramus, NJ — Built to Order, Direct from the Importer
Hundreds of designer vanities from 20 to 72 inches wide, plus fully custom vanities built to order at our 5,000 sq ft Bergen County showroom. Custom builds are made in the USA, with many orders ready in about two weeks.
ANVE Kitchen & Bath sells bathroom vanities in Paramus, New Jersey — hundreds of designer vanities in 3,100+ size and finish combinations, plus fully custom vanities built to order. As a direct importer with no middleman, we bring James Martin, Cartisan Design, Blossom, Fine Fixtures, Alya Bath, and our own Anve Bath line to Bergen County homeowners at honest pricing, backed by an in-house design team and a 5,000 sq ft Route 4 showroom. Choose single or double, freestanding or wall-mount, 20 to 72 inches wide — and because our custom builds are made in the USA, many are ready in about two weeks.
Why Buy Bathroom Vanities from ANVE in Paramus
Most vanity shoppers in Bergen County compare three things: price, selection, and the chance to see cabinets and tops in person before they commit. ANVE is built to win on all three. We import directly, so you are not paying a chain of distributors and showrooms layered on top of the vanity. You can stand in front of a finished double vanity, run your hand across a 3 CM Silestone top, and hold a Satin Brass pull next to a white-oak door the same afternoon.
What sets ANVE apart
- Importer-direct pricing — no middleman markup between the maker and you
- In-stock & custom under one roof — same-day pickup on in-stock pieces, built-to-order when you need an exact fit
- 5,000 sq ft Paramus showroom — vanities, tops, and hardware finishes on display side by side
- Made-in-USA custom builds — many custom vanity orders ready in about two weeks
- In-house design help — free sizing, configuration, and finish guidance
- Financing & buy-now-pay-later available at checkout on our Shopify store
Whether you are refreshing a powder room or outfitting a double-sink primary bath, the goal is the same: a vanity that fits your space exactly and arrives on your timeline. Start with our bathroom vanity buying guide for sizing help — and if you are planning a kitchen too, see our kitchen cabinets page.
Custom vs. In-Stock Bathroom Vanities: Which Is Right for You?
What is a custom bathroom vanity? A custom bathroom vanity is built to order for your exact space — your choice of width, depth, height, configuration, and finish — unlike stock vanities sold in fixed sizes. ANVE Kitchen & Bath builds custom vanities in Paramus, NJ; they are made in the USA, and many orders are ready in about two weeks.
In-Stock Designer Vanities
In-stock vanities are finished pieces from James Martin, Cartisan Design, Blossom, Fine Fixtures, Alya Bath, Wyndham Collection, and our own Anve Bath line, kept on hand at the Paramus showroom in the most popular widths — 20, 24, 30, 36, 42, 48, 54, 60, and 72 inches. They are the fast route: in-stock pieces are available for same-day pickup, ideal for time-sensitive remodels, and the catalog spans more than 3,100 size and finish combinations.
Built-to-Order Custom Vanities
Custom vanities and bathroom cabinetry are built to order and crafted to maximize storage, style, and durability in wet environments. That covers floating vanities, double and single vanities, custom linen towers, makeup vanities, wall cabinets and tall storage, medicine cabinet integrations, and special depth or height requirements. Built in premium woods and made in the USA, many custom orders are ready in about two weeks. Explore custom bathroom vanities →
| Factor | In-Stock Designer Vanities | Built-to-Order Custom |
|---|---|---|
| Typical lead time | In stock — same-day pickup or scheduled delivery | Many orders ready in ~2 weeks |
| Sizing | Stocked widths from 20″ to 72″ | Built to your exact width, depth & height |
| Starting price | From about $300; most $700–$2,100 | Quoted at your free consultation |
| Configurations | Single & double, freestanding, wall-mount, vessel-sink, open-bottom | Floating, double & single, linen towers, makeup vanities, tall storage |
| Best for | Fast timelines & popular sizes | Odd spaces, exact fits, whole-home matching |
Does ANVE sell in-stock bathroom vanities? Yes. ANVE Kitchen & Bath carries hundreds of designer bathroom vanities, and in-stock pieces are available for same-day pickup at its Paramus, NJ showroom. As a direct importer with no middleman, ANVE passes lower pricing to Bergen County homeowners.
Bathroom Vanity Styles & Configurations
The right configuration comes down to your wall space, your plumbing, and how many people share the bath. Here are the configurations ANVE stocks, with quick guidance for each so you can shortlist before you visit.
Single-Sink Vanities
One basin, up to about 48 inches wide — the workhorse of most full baths. A 20- or 24-inch piece suits a powder room, 36 inches is the standard full-bath size, and a 48-inch single gives generous counter space without a second sink. Shop single vanities, or jump straight to 30–35 inch widths.
Double Vanities
Two basins, starting around 60 inches wide and running up to 72 inches in stock. If two people share the bathroom and the wall allows it, a double ends the morning traffic jam and adds a full second bank of storage. Shop double vanities, or browse 48–59 inch widths for wide singles and compact doubles.
Single vs. double vanity: A single-sink vanity runs up to about 48 inches wide and fits most full baths; a double-sink vanity starts around 60 inches and makes sense when two people share the bathroom. ANVE stocks both configurations at its Paramus, NJ showroom in widths from 20 to 72 inches.
Wall-Mount / Floating Vanities
A floating vanity mounts to the wall with open space beneath — a clean, modern look that makes the floor easier to clean and the room feel larger. Pair one with a vessel sink or an LED mirror for a full contemporary bath. Shop wall-mount vanities →
Freestanding Vanities
A freestanding vanity sits on the floor like a piece of furniture — it is the most common configuration in our catalog, and the easiest to swap into an existing bath because it hides the plumbing behind full-height cabinetry.
Freestanding vs. wall-mount vanity: A freestanding vanity sits on the floor like furniture and is the most common configuration in ANVE’s catalog; a wall-mount (floating) vanity attaches to the wall with open space beneath for a modern look. ANVE stocks both at its Paramus, NJ showroom.
Vessel-Sink Vanities
A vessel sink sits on top of the counter rather than dropping into it, turning the basin itself into a design feature. Shop vessel-sink vanities →
Open-Bottom & Cabinet-Only
Open-bottom vanities trade closed doors for open storage beneath the sink, and cabinet-only pieces come without a top so you can pair your own stone. Browse open-bottom vanities and vanities without a top.
Beyond configuration, most pieces fall into three looks — modern, contemporary, and transitional — and small baths get a dedicated 18-inch-deep narrow-depth range that keeps walkways clear.
Vanity Materials, Tops & Construction
The cabinet is what you see; the top and construction are what you live with. A bathroom is a wet environment — steam, splashes, and daily wear — so the top you choose and the way a custom piece is built matter as much as the color.
What vanity tops does ANVE offer? Most ANVE vanity tops are 3 CM engineered quartz — mainly Silestone, in colors like White Zeus, Eternal Jasmine Pearl, Charcoal Soapstone, and Ethereal Noctis — plus Eclos surfaces (Phantome and Tajnar) and natural Carrara marble. Cabinet-only vanities let you supply your own top.
ANVE custom vanity builds
- Built to order in premium woods
- Made in the USA — many orders ready in about two weeks
- Crafted for wet environments — storage, style & durability
- Special depth & height requirements accommodated
- Linen towers, makeup vanities & medicine-cabinet integrations
- Finishes matched across kitchen, bath & laundry
| Top option | Colors & details | Notes |
|---|---|---|
| Silestone quartz | White Zeus, Eternal Jasmine Pearl, Charcoal Soapstone, Ethereal Noctis | 3 CM engineered quartz — the majority of stocked tops |
| Eclos surfaces | Phantome, Tajnar | 3 CM engineered surfaces on select vanities |
| Carrara marble | Natural white-gray veined stone | The natural-stone option in the lineup |
| Cabinet-only | No top included | Pair your own stone, remnant, or fabricator top |
Some stocked tops include a built-in FreePower wireless phone charger set directly into the stone. Ask which pieces carry it when you visit or call.
Want the same finish carried across your bathroom, kitchen, and laundry? We coordinate whole-home cabinetry in matching wood, finish, and hardware — see our custom cabinetry page for the full scope.
Popular Bathroom Vanity Colors & Finishes
Color is where personal taste and resale value meet. These are the vanity finishes Paramus and Bergen County shoppers reach for most across our catalog — each available in multiple widths and configurations.
Most-stocked finishes
- White — the most-stocked vanity finish in our catalog; bright, timeless, resale-safe
- Gray — soft neutral that suits modern and transitional baths alike
- Natural oak — warm wood grain for a modern-organic look
- Walnut — deeper wood tone with furniture-style warmth
- Matte black — dramatic and modern; pairs beautifully with brass hardware
- Hardware finishes — Black, Chrome, Satin Brass, Rose Gold & Brushed Nickel on display
A cabinet color reads differently under bathroom lighting than it does on a screen. Bring your tile or flooring sample to the showroom and set it against real doors, tops, and hardware before you decide — the whole comparison takes minutes in person.
How Much Does a Bathroom Vanity Cost in NJ? (2026 Price Guide)
How much does a bathroom vanity cost in NJ? At ANVE in Paramus, in-stock bathroom vanity starting prices run from about $300, and most fall between roughly $700 and $2,100 (median about $1,160). Large 60–72 inch doubles range up to about $5,100. Custom built-to-order vanities are quoted individually at a free consultation.
Vanity pricing scales primarily with width — a 24-inch powder-room piece and a 72-inch double are different animals. The table below shows starting (entry) prices by width bracket from our live catalog. Use it as a planning guide; your exact number depends on brand, top, and finish.
| Vanity width | Starting-price range | Median starting price | Typical use |
|---|---|---|---|
| 18–24″ | $479–$1,122 | $715 | Powder rooms & small guest baths |
| 25–30″ | $632–$1,672 | $979 | Single-sink secondary baths |
| 31–36″ | $597–$3,857 | $1,199 | Standard full baths |
| 48–59″ | $744–$2,596 | $2,074 | Wide singles & compact doubles |
| 60–72″ | $984–$5,126 | $3,218 | Double-sink primary baths |
Starting (entry) prices per vanity from ANVE’s live catalog as of mid-2026 — treat them as “from” prices, not fixed quotes; the final price depends on the size, top, and finish options you select, and ranges shift with stock. 42-inch, 54-inch, and other in-between widths are also stocked — ask for current pricing. Custom built-to-order vanities are quoted at your free design consultation.
Because ANVE imports directly, our pricing typically lands below what you would pay for a comparable vanity through a multi-tier distributor. The best way to get a real number is a free consultation — bring your bath’s measurements and we will price your actual project, not a generic estimate.
Our Bathroom Vanity Design Process
Choosing a vanity should not be intimidating. Our designers walk you through six clear steps, whether you arrive with contractor drawings or a few phone photos of the bath.
- Measure & assess — we review your bath’s dimensions, plumbing location, and storage needs
- Configuration — single or double, freestanding or wall-mount, and the width and depth that fit
- Cabinet & top — choose the cabinet finish and a Silestone quartz, Eclos, or Carrara marble top from real samples
- Hardware & extras — compare Black, Chrome, Satin Brass, Rose Gold & Brushed Nickel; add linen towers or medicine cabinets
- Timeline & quote — in-stock pieces can go home the same day; custom builds are quoted and scheduled in writing
- Delivery & installer coordination — we supply the vanity, top, sink, and faucet and coordinate with your plumber or contractor
Most consultations take under an hour, and there is no obligation. Come see why standing in front of a finished vanity beats scrolling photos online.
Bathroom Vanities for Bergen County & Nearby Towns
From our Route 4 showroom in Paramus, ANVE serves homeowners, builders, and designers across Bergen County and North Jersey — and vanity orders travel well beyond it, with deliveries across New Jersey, New York, and Connecticut. In-stock pieces can be picked up the same day; deliveries are scheduled around your project.
Bergen County towns we serve
- Bathroom Vanities Paramus, NJHome town & showroom
- Bathroom Vanities Fort Lee, NJHigh-rise condos
- Bathroom Vanities Tenafly, NJAffluent custom homes
- Bathroom Vanities Demarest, NJLarge custom homes
- Bathroom Vanities Hackensack, NJCounty seat, in-stock & custom
- Bathroom Vanities Englewood, NJDiverse, fast-growing market
We also serve Englewood Cliffs, Closter, Cresskill, Fair Lawn, Franklin Lakes, Ridgewood, Wyckoff, and every other Bergen County town. Don’t see yours? We deliver bathroom vanities across NJ, NY, and CT. Reach out and we’ll confirm delivery to your area.
Visit Our Paramus Bathroom Vanity Showroom
See finished vanities, compare tops and hardware side by side, and take an in-stock piece home the same day at our 5,000 sq ft showroom on Route 4 — easy to reach from anywhere in Bergen County.
Paramus, NJ 07652
Sat 10 AM–4 PM · Sun closed
Get a Free Bathroom Design Consultation
Tell us about your bath — sizes, single or double, the styles you love, or a few inspiration photos — and our design team will reply, usually within one business day.
Bathroom Vanities FAQ
Does ANVE sell custom and in-stock bathroom vanities?
Yes — ANVE Kitchen & Bath sells both. We carry hundreds of designer vanities, with in-stock pieces ready for same-day pickup at our Paramus, NJ showroom, and our custom shop builds bathroom vanities to order — made in the USA, with many ready in about two weeks.
How much does a bathroom vanity cost in NJ?
In ANVE’s live catalog, bathroom vanity starting prices run from about $300, and most fall between roughly $700 and $2,100. Compact 18–24 inch vanities start at $479–$1,122, while large 60–72 inch doubles run $984–$5,126. Custom built-to-order vanities are quoted individually at your free consultation.
What sizes do ANVE bathroom vanities come in?
ANVE stocks vanity widths of 20, 24, 30, 36, 42, 48, 54, 60, and 72 inches — a catalog spanning 20 to 72 inches. As a rule of thumb: 20–24 inches suits a powder room, 36 inches a standard full bath, 48 inches a wide single or compact double, and 60 inches and up a double-sink primary bath. Custom builds can be made to special widths, depths, and heights.
Should I choose a single or double vanity?
Single-sink vanities run up to about 48 inches wide and fit most full baths. If two people share the bathroom and you have the wall space, a double-sink vanity from 60 inches and up adds a second basin and more storage. ANVE stocks both at the Paramus showroom.
What is a floating (wall-mount) vanity?
A floating vanity mounts to the wall with open space beneath, giving the bath a modern look and making floors easier to clean. ANVE carries wall-mount, freestanding, open-bottom, and cabinet-only (no top) vanities, plus vessel-sink designs.
What vanity brands does ANVE carry?
ANVE carries James Martin, Cartisan Design, Blossom, Fine Fixtures, Alya Bath, Wyndham Collection, and the Anve Bath house line, alongside our own custom built-to-order vanities. You can compare brands side by side at the Paramus showroom.
What countertop options come with ANVE vanities?
Most tops are 3 CM engineered quartz — mainly Silestone, in colors like White Zeus, Eternal Jasmine Pearl, Charcoal Soapstone, and Ethereal Noctis — plus Eclos surfaces (Phantome, Tajnar) and natural Carrara marble. Cabinet-only vanities let you supply your own top, and some tops include a built-in FreePower wireless phone charger.
Can ANVE build a fully custom bathroom vanity?
Yes. ANVE builds bathroom vanities and cabinetry to order — floating vanities, double and single vanities, custom linen towers, makeup vanities, wall cabinets and tall storage, medicine cabinet integrations, and special depth or height requirements. Custom builds are made in the USA, with many orders ready in about two weeks.
Does ANVE install bathroom vanities?
ANVE supplies the vanity, top, sink, and faucet and coordinates delivery; your plumber or contractor handles the installation. We clarify the exact scope — pickup, delivery, or installer coordination — during your free consultation.
Do I need a permit to replace a bathroom vanity in NJ?
A like-for-like vanity swap in the same location usually needs no permit. If your project moves plumbing, a permit is typically required and your plumber pulls it. Always confirm with your town’s Building Department before you start.
Does ANVE offer financing or buy-now-pay-later?
Yes. Financing and buy-now-pay-later options are available at checkout through our Shopify store, so you can spread the cost of a vanity or full bath project over time. Ask your designer for current options and terms.
What areas does ANVE serve for bathroom vanities?
ANVE serves Paramus and all of Bergen County — including Fort Lee, Tenafly, Englewood Cliffs, Closter, Cresskill, Demarest, Fair Lawn, Franklin Lakes, Ridgewood, Hackensack, Englewood, and Wyckoff — plus nearby North Jersey and NYC, with vanity deliveries across NJ, NY, and CT. Our showroom is at 129 E Route 4, Paramus.
Can I see bathroom vanities in person before buying?
Yes — our 5,000 sq ft Paramus showroom on Route 4 displays vanities, tops, and hardware finishes in Black, Chrome, Satin Brass, Rose Gold, and Brushed Nickel side by side, and in-stock pieces are available for same-day pickup. We’re open Monday–Friday 9 AM–5 PM and Saturday 10 AM–4 PM. Call (201) 742-5252.
Can ANVE match my vanity to kitchen and laundry cabinetry?
Yes. ANVE coordinates whole-home cabinetry so your bathroom vanities, kitchen, laundry, and built-ins share the same wood, finish, and hardware. See our custom cabinetry page for the full whole-home scope.
Serving NJ, NY & CT
Find Kitchen & Bath Help in Your Town
ANVE Kitchen & Bath serves homeowners, contractors and designers across New Jersey, New York and Connecticut from our Paramus showroom — with local bathroom-vanity and kitchen-cabinet pages for 70+ cities.
Jersey City · Hoboken · Newark · Paramus · Hackensack · Clifton · Yonkers · Stamford
See All Service Areas →